Engineering, 08.02.2021 23:50 askharoun2005
A special C-clamp uses a 0.5- in.-diameter Acme thread and a collar of 0.625-in. effective mean diameter. The collar is attached rigidly to the top end of the externally threaded member. Determine the force required at the end of the 6- in. handle to develop a 150-lb clamping force.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
A special C-clamp uses a 0.5- in.-diameter Acme thread and a collar of 0.625-in. effective mean diam...
Questions
Mathematics, 16.11.2020 16:10
Health, 16.11.2020 16:10
Mathematics, 16.11.2020 16:10
History, 16.11.2020 16:10
Social Studies, 16.11.2020 16:10
Health, 16.11.2020 16:10
Mathematics, 16.11.2020 16:10
Mathematics, 16.11.2020 16:10
Mathematics, 16.11.2020 16:10
