subject
Engineering, 13.02.2021 05:30 ineedhelp2322

Problem 3 - An acrylic testing box is covered on the top with an unknown 15 mm insulation material with dimensions of 25 cm by 25 cm. A 25.0W bulb is used to heat the box and it maintains the inside temperature at 10.0ºC higher than the outside temperature. a. Determine the thermal conductivity (k) for the insulating material.
b. Find the energy transferred (Q) through the material after a half hour.
c. Find the R-value of the insulation.

I don't understand how to do this

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
You know the right answer?
Problem 3 - An acrylic testing box is covered on the top with an unknown 15 mm insulation material w...
Questions
question
Mathematics, 26.03.2020 01:01
question
Mathematics, 26.03.2020 01:01
Questions on the website: 13722362