Engineering, 13.02.2021 14:00 niquermonroeee

Q4 / Equipment ratings for the four - bus power system shown in Figure are given as follows: TI 73 60 500 Generator GI: 500 MVA, 13.8 KV. X = X2 = 0.20. Xo = 0.10 per unit Generator G2: 750 MVA, 18 KV. X = X2 = 0.18, Xo = 0,09 per unit Generator G3: 1000 MVA, 20 kV, X = 0.17. Xz = 0.20.Xo = 0.09 per unit Transformer Ti: 500 MVA, 13.8 kV A / S00 kV Y. X = 0.12 per unit Transformer T2: 750 MVA, 18 LV A / 500 kV Y, X = 0.10 per unit Transformer T3: 1000 MVA, 20 kV A / 500 kV Y. X = 0.10 per unit each line: X = 50 ohms, X, = 150 ohms 77 The inductor connected to generator G3 neutral has a reactance of 0.028 pu. Draw the zero-, positive-, and negative - sequence reactance diagrams using a 1000 - MVA, 20 - KV base in the zone of generator G3

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

Answer

You know the right answer?

Q4 / Equipment ratings for the four - bus power system shown in Figure are given as follows: TI 73 6...

Questions