subject
Engineering, 15.02.2021 20:20 skifchaofficial01

Humans are able to control their heat production rate and heat loss rate to maintain a nearly constant core temperature of Tc 37 C under a wide range of environmental conditions. This process is called thermoregulation. From the perspective of calculating heat transfer between a human body and its surroundings, we focus on a layer of skin and fat, with its outer surface exposed to the environment and its inner surface at a temperature slightly less than the core temperature, Ti 35 C 308 K. Consider a person with a skin/fat layer of thickness L 3 mm and effective thermal conductivity k 0.3 W/m K. The person has a surface area A 1.8 m2 and is dressed in a bathing suit. The emissivity of the skin is 0.95. 1. When the person is in still air at T 297 K, what is the skin surface temperature and rate of heat loss to the environment? Convection heat transfer to the air is characterized by a free convection coefficient of h 2 W/m2 K. 2. When the person is in water at T 297 K, what is the skin surface temperature and heat loss rate? Heat transfer to the water is characterized by a convection coefficient of h 200 W/m2 K.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
Humans are able to control their heat production rate and heat loss rate to maintain a nearly consta...
Questions
question
Mathematics, 16.10.2020 17:01
question
Mathematics, 16.10.2020 17:01
Questions on the website: 13722367