subject
Engineering, 17.02.2021 01:00 emory238

A fresh feed of butanol (B, C, H, OH), oxygen (O2), and nitrogen (N2) is mixed with a recycle stream and fed to a reactor overseen by Romana and Boswell. The flow rate of the fresh feed is 456 mol/hr with
mole fractions of 0.057 for butanol, 0.539 for oxygen, and the balance nitrogen. The reactor effluent
contains butanol, oxygen, nitrogen, CO2, NOx, and water (W, H20), which is fed to a separator. A gas
stream containing oxygen, nitrogen, CO2, NO2, and some of the water exits the separator, and a
butanol/water stream also exits the separator. Ninety-five times more water exits the separator in the
gas stream than exits the overall system in the purge stream. The overall conversion of butanol is 78%,
and the single pass conversion of butanol is 55%. The component flow rates of oxygen and nitrogen
leaving the separator are 65,8 mol/hr and 155 mol/hr, respectively,
In the last level, the overall system was solved. Component molar flow rates were found in units of
mol/hr as ň4,co, - 81.1. NA, NO, = 58.4, ņa, w = 100.3, no, B = 5.72, and now = 1.056,
Now, find the component molar flow rate (mol/hr) of the feed to the reactor
02,N2
NB
Ex: 29.2
02,02 =
EX 194
n2,w =
Ex: 1.50
mol/h
mol/hr
Ex: 146
mol/hr
mol/hr

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
You know the right answer?
A fresh feed of butanol (B, C, H, OH), oxygen (O2), and nitrogen (N2) is mixed with a recycle stream...
Questions
question
Mathematics, 18.10.2020 09:01
question
Mathematics, 18.10.2020 09:01
question
Computers and Technology, 18.10.2020 09:01
question
History, 18.10.2020 09:01
Questions on the website: 13722367