Engineering, 18.02.2021 20:50 niah2699
A 20 wt% Na2SO4 solution is fed at a rate of 20 lb/min. into a mixer that initially hold 400 lb of a 50 wt% Na2SO4 solution. The exit solution leaves at a rate of 15 lb/min. Assume perfect mixing, the mass fraction x of Na2SO4 as a function of time can be determined from the following equation:.
(a) What is the total mass in the mixer at the end of 10 minutes?
(b) What is the concentration of Na2SO4 in the mixer at the end of 10 minutes?
(c) How long will it take for the mass fraction of Na2SO4 in the tank to reduce to 0.35?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
You know the right answer?
A 20 wt% Na2SO4 solution is fed at a rate of 20 lb/min. into a mixer that initially hold 400 lb of a...
Questions
Biology, 01.08.2019 05:30
Biology, 01.08.2019 05:30
Mathematics, 01.08.2019 05:30
History, 01.08.2019 05:30
Business, 01.08.2019 05:30
