Engineering, 18.02.2021 23:40 ashanty45
A spherical Pyrex glass shell has inside and outside diameters of 0.1 m and 0.2 m, respectively. The inner surface is at 100C while the outer surface is at 45 C. (a) Determine the temperature at the midpoint of the shell thickness at radial location of 0.075 m). (b) For the same surface temperatures and dimensions as in part (a), will the midpoint temperature decrease/increase if the shell material were aluminum
Answers: 1
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
A spherical Pyrex glass shell has inside and outside diameters of 0.1 m and 0.2 m, respectively. The...
Mathematics, 03.01.2020 01:31
Health, 03.01.2020 01:31
Spanish, 03.01.2020 01:31
Health, 03.01.2020 01:31
English, 03.01.2020 01:31