The rig shown consists of a 500 kg horizontal member ABC and a vertical member DBE welded together at B. The rig is being usual to raise a 1500kg (m) crate at a distance x = 3.6m from the vertical member DBE. If the tension in the cable is 20 kN, determine the reaction at E assuming that the cable is (a) Anchored at F as shown in the figure
(b) Attached to the vertical member at a point 0.3m above E​

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w