Engineering, 25.02.2021 20:00 2023jpeterson

25 In differential aeration corrosion, rich oxygenated parts are (a) anodic(b)cathodic
(c) protected (d) none of above
26
To eliminate entrapment of moisture, it is advised to
(a) make corners smooth
(b) coat the containers
(c) use corrosion resistant alloy, like cupro-nickel (d) provide a drainage hole
27 Storage containers should be designed in such a way that
(a) No crevices are formed
(b) No obstacle to drainage occurs
(c) The design should ensure that the containers are drained in minimum time
(d) the containers should be constructed from plastics rather than metals or allows
28 The corrosion resistance of metals, such as stainless steels and copper alloys.
depends upon the buildup of uniform surface films. Which one of the following
would require a maximum attention of the designer?
(a) Accessibility of oxygen in the operating medium.
(b) Coating of the metal
(c)The drainage capability of the vessel (d)
The period of storage of the liquid in the container

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

You know the right answer?

25 In differential aeration corrosion, rich oxygenated parts are (a) anodic(b)cathodic
(c) pro...

Questions