Engineering, 25.02.2021 21:10 jack6563
The design of a machine element calls for a 40-mm-outer-diameter shaft to transmit 49 kW. If the speed of rotation is 790 rpm, determine (a) the maximum shear stress in shaft (a). (b) the maximum shear stress in shaft (b) with inner diameter 22 mm.
Answers: 1
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
The design of a machine element calls for a 40-mm-outer-diameter shaft to transmit 49 kW. If the spe...
Mathematics, 18.03.2020 16:57
Mathematics, 18.03.2020 16:58
Mathematics, 18.03.2020 16:58
Social Studies, 18.03.2020 17:00
Mathematics, 18.03.2020 17:01