Engineering, 26.02.2021 01:10 jennychrin95
What two things must be included in your function definition?
•A function name and commands to be performed
o
•Function variables and commands to be performed
•Commands to be performed and function arguments
• A function name and function variables
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
What two things must be included in your function definition?
•A function name and commands to be p...
Social Studies, 26.07.2019 19:00
History, 26.07.2019 19:00
Mathematics, 26.07.2019 19:00
Mathematics, 26.07.2019 19:00
Mathematics, 26.07.2019 19:00
Biology, 26.07.2019 19:00
Mathematics, 26.07.2019 19:00
Social Studies, 26.07.2019 19:00
Social Studies, 26.07.2019 19:00