Engineering, 26.02.2021 19:30 luthfipadasseri

Two mechanics, Alda and Bryce, are discussing how to check for back pressure. Alda says they should use an oxygen sensor, but that using an EGR valve won't work.
Bryce says they can use either, so long as they fabricate a plate at the EGR valve.
Who's right?
Both Alda and Bryce make a good point
Neither Alda nor Bryce
Alda
Bryce

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 06.07.2019 04:30

At flow nozzle is to be installedin a 5-in type k copper tube carrying linseed oil at 77 f. a mercury manometer is to be used to measure the pressure difference across the nozzle when the expected range of the flow rate is from 700 galmin to 1000 gal/min. the manometer scale ranges from 0 to 8.0 in of mercury determine an appropriate diameter of the nozzle.

Answers: 2

Answer

Engineering, 06.07.2019 04:30

Acylindrical tank is capable of storing 20,000 foot-pounds [ft ibf] of energy for use in your roommate's 2006 subaru wrx. the tank contains nitrous oxide, n20, which you may assume is an ideal gas and has a molecular weight of 44 grams per mole 1g/mol. the tank fits in a space in the trunk that is no wider than 6 inches fin] and no longer than 10 inches [inj, and you may assume the warm clemson weather is keeping the temperature of the tank inside the trunk at a constant 100 degrees fahrenheit [°fl. what is the weight of the nitrous oxide occupying the tank when full, in units of dynes

Answers: 1

Answer

You know the right answer?

Two mechanics, Alda and Bryce, are discussing how to check for back pressure. Alda says they should...

Questions