Engineering, 28.02.2021 16:50 madisonsan9020

While playing a game of catch on the quadrangle, you throw a ball at an initial velocity of 17.6 m/s (approximately 39.4 mi/hr), at an angle of 50 degrees above horizontal. The ball flies past your friend, and lands on the ground. You let the ball go at a height of 2 m above the ground. Define upward as the positive y direction, and the horizontal direction of the ball's travel as the positive x direction. You can assume that air resistance and any effects of the ball spinning are so small that they can be ignored; this means that gravity is the only force causing an acceleration. Required:
a. What is the y-component of velocity just before the ball hits the ground?
b. For how much time is the ball in the air?
c. How far horizontally does the ball travel before it hits the ground?
d. What is the magnitude of the velocity of the ball just before it hits the ground?
e. What is the angle of the total velocity of the ball just before it hits the ground?

Answers: 3

Show answers

Answers

Answer from: Lawrence101

a) The y-component of velocity just before the ball hits the ground is -14.860 meters per second.

b) The ball is in the air during approximately 2.890 seconds.

c) The horizontal distance covered by the ball is 32.695 meters.

d) The magnitude of the velocity of the ball just before it hits the ground is approximately 18.676 meters per second.

e) The angle of the total velocity of the ball just before it hits the ground is approximately 52.717º below the horizontal.

Explanation:

a) The ball experiments a parabolic motion, which is a combination of horizontal motion at constant velocity and vertical motion at constant acceleration. First, we calculate the time taken by the ball to hit the ground:

$y = y_{o} + (v_{o}\cdot \sin \theta) \cdot t+\frac{1}{2}\cdot g\cdot t^{2}$ (1)

Where:

$y_{o}$ , - Initial and final vertical position, measured in meters.

$v_{o}$ - Initial speed, measured in meters per second.

$\theta$ - Launch angle, measured in sexagesimal degrees.

- Gravitational acceleration, measured in meters per square second.

- Time, measured in seconds.

If we know that $y_{o} = 2\,m$ , $y = 0\,m$ , $v_{o} = 17.6\,\frac{m}{s}$ , $\theta = 50^{\circ}$ and $g = -9.807\,\frac{m}{s^{2}}$ , then the time taken by the ball is:

$-4.904\cdot t^{2}+13.482\cdot t +2 = 0$ (2)

This second order polynomial can be solved by Quadratic Formula:

$t_{1} \approx 2.890\,s$ and $t_{2} \approx -0.141\,s$

Only the first root offers a solution that is physically reasonable. That is, $t \approx 2.890\,s$ .

The vertical velocity of the ball is calculated by this expression:

$v_{y} = v_{o}\cdot \sin \theta +g\cdot t$ (3)

Where:

$v_{o,y}$ , $v_{y}$ - Initial and final vertical velocity, measured in meters per second.

If we know that $v_{o} = 17.6\,\frac{m}{s}$ , $\theta = 50^{\circ}$ , $g = -9.807\,\frac{m}{s^{2}}$ and $t \approx 2.890\,s$ , then the final vertical velocity is:

$v_{y} = -14.860\,\frac{m}{s}$

The y-component of velocity just before the ball hits the ground is -14.860 meters per second.

b) From a) we understand that ball is in the air during approximately 2.890 seconds.

c) The horizontal distance covered by the ball () is determined by the following expression:

$x = (v_{o}\cdot \cos \theta)\cdot t$ (4)

If we know that $v_{o} = 17.6\,\frac{m}{s}$ , $\theta = 50^{\circ}$ and $t \approx 2.890\,s$ , then the distance covered by the ball is:

$x = 32.695\,m$

The horizontal distance covered by the ball is 32.695 meters.

d) The magnitude of the velocity of the ball just before hitting the ground (), measured in meters per second, is determined by the following Pythagorean identity:

$v = \sqrt{(v_{o}\cdot \cos \theta )^{2}+v_{y}^{2}}$ (5)

If we know that $v_{o} = 17.6\,\frac{m}{s}$ , $\theta = 50^{\circ}$ and $v_{y} = -14.860\,\frac{m}{s}$ , then the magnitude of the velocity of the ball is:

$v \approx 18.676\,\frac{m}{s}$ .

The magnitude of the velocity of the ball just before it hits the ground is approximately 18.676 meters per second.

e) The angle of the total velocity of the ball just before it hits the ground is defined by the following trigonometric relationship:

$\tan \theta = \frac{v_{y}}{v_{o}\cdot \cos \theta_{o}}$

If we know that $v_{o} = 17.6\,\frac{m}{s}$ , $\theta_{o} = 50^{\circ}$ and $v_{y} = -14.860\,\frac{m}{s}$ , the angle of the total velocity of the ball just before hitting the ground is:

$\theta \approx -52.717^{\circ}$

The angle of the total velocity of the ball just before it hits the ground is approximately 52.717º below the horizontal.

Answer from: Quest

answer:

d. attempt to find the owner, then leave your information if you cannot find them.

explanation:

d. represents both (b) and (c).

more logical as well.

b and c are to complicated.

glad i could , give me a follow, so if you need with any other question, im here.

Answer from: Quest

answer:

the fed will purchase bonds from banks to inject money into the banking system. the banks can use these funds to provide loans to individuals and businesses.

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

You know the right answer?

While playing a game of catch on the quadrangle, you throw a ball at an initial velocity of 17.6 m/s...

Questions