Engineering, 28.02.2021 17:30 MajentaSnow66
A metal alloy has been tested in a tensile test with the following results for the flow curve
parameters: strength coefficient = 620.5 MPa and strain-hardening exponent = 0.26. The
same metal is now tested in a compression test in which the starting height of the specimen
= 62.5 mm and its diameter = 25 mm. Assuming that the cross section increases uniformly,
determine the load required to compress the specimen to a height of (a) 50 mm and (b) 37.5
mm.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
A metal alloy has been tested in a tensile test with the following results for the flow curve
param...
Questions
Social Studies, 06.10.2019 15:00
English, 06.10.2019 15:00
Mathematics, 06.10.2019 15:00
Mathematics, 06.10.2019 15:00
Mathematics, 06.10.2019 15:00
Computers and Technology, 06.10.2019 15:00
Biology, 06.10.2019 15:00
Mathematics, 06.10.2019 15:00
