subject
Engineering, 28.02.2021 16:50 warnene17

A vertical aerial photograph reveals a tall building. The foot of one corner of the building has (x, y) coordinates (30.5, 62.0) (both measured in mm from the lower left- hand corner of the negative), and the top of the same edge appears at (19.0, 58.0). The corresponding coordinates for an adjacent edge of the building are (30.5, 73.0) and (19.0, 71.5). Given that the camera's focal length was 88 mm and the aircraft's altitude 212 m, find (i) the coordinates of the photograph's principal point (directly below the camera),
(ii) the height, and
(iii) the width of the building.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A vertical aerial photograph reveals a tall building. The foot of one corner of the building has (x,...
Questions
question
Mathematics, 27.10.2021 09:20
Questions on the website: 13722361