In this assignment you will have to present in 10 steps how to terminate an Ethernet cable . You have to follow the next instruction . 1. Type of Cable copper base etc2. Compound (materials ) 3. Jack type 4. Color code . 5. Procedure 6. Length of the cut . 7. Tools used 8. POE capability 9. Testers 10. Plenum​

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.