Engineering, 01.03.2021 22:00 sunshine52577oyeor9
If you needed to choose a polymer to do FFF/FDM, how would you rank the following properties in terms of how important they would be to the FFF/FDM process and the subsequent use of what you printed. Using bullets briefly explain what each property is and why the property it is where it is in your ranking. List the most important property first.
a. Density
b. Elastic modulus
c. Coefficient of thermal expansion
d. Melting
e. Temperature and Glass
f. Transition Temperature
Answers: 2
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
If you needed to choose a polymer to do FFF/FDM, how would you rank the following properties in term...
English, 05.05.2020 00:24
Biology, 05.05.2020 00:24
Mathematics, 05.05.2020 00:24
English, 05.05.2020 00:24
Mathematics, 05.05.2020 00:24
History, 05.05.2020 00:24
Mathematics, 05.05.2020 00:24
Chemistry, 05.05.2020 00:24
Mathematics, 05.05.2020 00:24
Social Studies, 05.05.2020 00:24
Social Studies, 05.05.2020 00:24