Engineering, 02.03.2021 06:00 longboard5967
Technician A says that one benefit of a hybrid is that the A/C system can be turned on remotely. Technician B says that the compressor in the hybrid A/C system may be driven by the ICE through a standard belt and electromagnetic clutch arrangement. Who is correct?
Answers: 3
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Technician A says that one benefit of a hybrid is that the A/C system can be turned on remotely. Tec...
SAT, 07.12.2021 14:50
SAT, 07.12.2021 14:50
SAT, 07.12.2021 14:50
SAT, 07.12.2021 14:50
Engineering, 07.12.2021 14:50
Biology, 07.12.2021 14:50
SAT, 07.12.2021 14:50
Physics, 07.12.2021 14:50
SAT, 07.12.2021 14:50
SAT, 07.12.2021 14:50