Arrange the lines of pseudocode so that, when the LeftBumper is pressed, the robot goes at half speed for 20 feet (which takes 10 seconds) and then stops. Reorder answers 1.} // end repeat Reorder answers 2.} // end if Reorder answers 3.Repeat forever { Reorder answers 4.Drive forward Reorder answers 5.Wait 10 seconds Reorder answers 6.If LeftBumper pressed then { Reorder answers 7.Set drive velocity to 50% Reorder answers 8.Stop driving

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?