subject
Engineering, 06.03.2021 01:00 Tyrant4life

Delicious Catering Services (DCS) has won a contract to provide catering services to two mining companies: Mine A and Mine B Management of DCS is faced with the challenge of deciding the mix of two modes of transporting foodstuff to the two mines. The rwo modes of transport are mini-bus and tuck. A truck transport services compeny has offered to make up to 10 truck tips per month at a cost of $2,500 and $2,000 per inp to Mine A and Mine B respectively. There are a number of mini-bus services available which can offer up to 24 inps per month at a cost of $1.200 per trip and $1,000 pes trip to Mine A and Mine B respecuvely. Each truck can carry 4 tonnes of foodstuff per inp and each mini-bus can carry 2 tonnes per trip Provision of catering services at the mines is such that at least 48 tonnes of foodstuff are

required per month and the food stuff requ rement at Mine B is at most 2/3 that at Mine A per month, Also the foodstuff delivered monthly to Mine A should be at least 8 tonnes more thart

that delivered at Mine B

Due to mechanical breakdowns and the effect of weather, only 80% and 85% of trucks arrive

on time to deliver foodstuff at Mine A and B respectively However mimi-buses are more Telrable with 90% and 95% armving on time at Mine A and Mine B respectively. DCS has set

a standard that at jeast 90% of all trips must arrive on ume no matter the mix of mode of

transport chosen DCS has allocated a monthly budget of up to $18,000 and $12,000 for

transportation to Mine A and Mine B respectively. Management of DCS desires to know the

mix of trips of the two modes of transport to Mines A and B at the minimum monthly cost. mer

Formulate thts as a linear programming model.​

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
You know the right answer?
Delicious Catering Services (DCS) has won a contract to provide catering services to two mining comp...
Questions
Questions on the website: 13722362