How do you jump start a car

Jumper cables

Explanation:

Put the ends of a jumper cable on each battery of a car and then turn the engine on and then the turn on the other car and then it should start.

Take out your jumper cables.

It’s a good idea to buy a set of jumper cables and keep them in the trunk compartment. If you don’t have jumper cables, you have to find a good Samaritan who not only is willing to assist you but who has jumper cables as well.

Place both vehicles in Park or Neutral and shut off the ignition in both cars.

Engage both parking brakes as well.

Attach one of the red clips to the positive terminal of your battery.

It has “POS” or “+” on it, or it’s bigger than the negative terminal.

Attach the other red clip to the positive terminal of the other car.

Attach one of the black clips to the negative terminal on the other battery.

Attach the last black clip to an unpainted metal surface on your car that isn’t near the battery.

Use one of the metal struts that holds the hood open.

To jump start a car, you'll need to make sure you connect the jumper cables in the proper order.

Make sure to connect jumper cables in the proper order.

Start the working vehicle and let the engine run for a few minutes.

Try to start your vehicle.

If it won’t start, make sure that the cables are properly connected and have the good Samaritan run his or her engine for five minutes. Then try to start your car again. If it still won’t start, your battery may be beyond help.

Explanation:

i just want to let you know i think your weird for not just looking it up.

answer:

explanation:

assault rifle is a rapid-fire, magazine-fed rifle designed for military use. it is a shoulder-fired weapon that allows the shooter to select between semi-automatic (requiring you pull the trigger for each shot), fully automatic (hold the trigger and the gun continuously fires) or three-shot-burst modes.