Choose answer below The demand for construction workers being dependent on the
demand for new housing is referred to as
A
B
C
D
Derived supply
Structural
unemployment
Derived demand
Seasonal
unemployment

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above