Engineering, 11.03.2021 23:40 kaamri97
A metal-filament lamp rated at 750W, 100V is to be used on a 230V, 50Hz supply by
connecting a capacitor of suitable value in series. Determine
(i) the capacitance required
(ii) phase angle
(iii) power factor
(iv) reactive power
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
Engineering, 04.07.2019 19:20
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
You know the right answer?
A metal-filament lamp rated at 750W, 100V is to be used on a 230V, 50Hz supply by
connecting a capa...
Questions
Mathematics, 10.10.2021 16:20
Mathematics, 10.10.2021 16:20
Mathematics, 10.10.2021 16:20
Mathematics, 10.10.2021 16:20
Chemistry, 10.10.2021 16:20
Computers and Technology, 10.10.2021 16:20
Business, 10.10.2021 16:20
Mathematics, 10.10.2021 16:20
Biology, 10.10.2021 16:20
Mathematics, 10.10.2021 16:30
