subject
Engineering, 12.03.2021 14:50 tasiajm

g 1. The theory used to determine the maximum power of a wind turbine is (A) actuator theory, (B) Fourier theory, (C) Maxwell theory. 2. The maximum power that can be extracted by a wind turbine is (A) 0.2963, (B) 0.593, or (C) 0.5 of the available wind power. 3. The two types of HAWT are (A) , (B),and VAWT are (C) , and (D). 4. The tower shadow is one of major concern of (A) upwind turbine, (B) downwind turbine or (C) vertical wind turbine. 5. The advantages of VAWT are (A) does not need to turn toward the wind (B) all powertrain components in the ground level, and (C) very stable. 6. The self-starting VAWT is (A) Darrieus wind turbine (B) Savonius wind turbine or (C) straight blade wind turbine. 7. Smaller number of blade will require (A) higher starting speed, (B) lower starting speed, (C) can self-starting. 8. Since air flow is not confined, the interference factors are used to compensate the air flow through the blade and there are (A) and (B) 9. For a self-starting Savonius vertical wind turbine, it has relative (A) high torque or (B) low torque at low wind speed. 10. The overall power generated by a wind turbine can be determined by the linear average wind speed during the period which is (A) True, or (B) False.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
You know the right answer?
g 1. The theory used to determine the maximum power of a wind turbine is (A) actuator theory, (B) F...
Questions
question
Mathematics, 15.01.2021 18:40
question
Arts, 15.01.2021 18:40
Questions on the website: 13722363