Engineering, 18.03.2021 01:20 niyahdabadest

Develop the model for a motor (from volts to speed). By March 8 a) Develop the model that includes the motor inductance. Find the transfer function with voltage as input and speed as output.
b) Develop the model that neglects the motor inductance. Find the transfer function with voltage as input and speed as output.
c) What are eigenvalue(s) for the system (for both models)? What is the corresponding time constant if the inductance of the motor is neglected?
d) Develop the model using Matlab: Simulate the step response of the motor to an input voltage of 24 Volts and compare the model with and without the motor inductance (plot the speed outputs on the same graph).

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 06.07.2019 04:20

Consider a beam traveling through diamond and impinging upon the diamond-air interface. the critical angle of incidence for total internal reflection to occur is closest to the following value: select one: a)-22.50° b)-23.85 c)-24.30 d)-23.40° e)-none of the above

Answers: 3

Answer

You know the right answer?

Develop the model for a motor (from volts to speed). By March 8 a) Develop the model that includes...

Questions