Engineering, 18.03.2021 01:30 Awesomedude1157

1. Defend the importance of communication in the software deployment process. 2. A beverage company is planning to market a new soft drink. Recommend the most effective way to test the product.

3.Explain why the scenario below fails to meet the definition of alpha testing.

An electronics company has mass-produced a product that has a major design flaw: a GPS that updates incorrectly when it switches time zones.
4. Explain why the scenario below fails to thoroughly complete the step of researching the problem, the second step in the engineering design phase.

Sam’s design team lists three product goals related to expense, safety, and construction. The team determines that parents of hockey players do not want to spend more than $50 on a helmet for their 10- to 12-year-old children.
5. Analyze the different kinds of engineering that went into the development of a familiar object, such as a cell phone.

6. Change the following minimally acceptable requirement into one that reflects an ideal value: The Pee Wee helmet needs to safely deflect high-impact pucks.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling

Answers: 2

Answer

Engineering, 05.07.2019 23:20

Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket

Answers: 3

Answer

You know the right answer?

1. Defend the importance of communication in the software deployment process. 2. A beverage company...

Questions