A 4-m-high and 6-m-long wall is constructed of twolarge 2-cm-thick steel plates (k 5 15 W/m·K) separated by1-cm-thick and 20-cm wide steel bars placed 99 cm apart. Theremaining space between the steel plates is filled with fiber-glass insulation (k 5 0.035 W/m·K). If the temperature dif-ference between the inner and the outer surfaces of the wallsis 22°C, determine the

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.