Engineering, 18.03.2021 01:40 aliopqwas

A DC power supply is formed of an ideal transformer feeding an ideal AC/DC full bridge SCR rectifier. The transformer input is at 120VRMS, and the rectifier nominal output is 24V. The input can fluctuate between 119VRMS and 122.1 VRMS, and the output voltage thus fluctuates between - 0.25% and 0.7% from the nominal voltage, respectively. The load is resistive and can also vary between 20W and 200W where the output voltage for this load range fluctuates between 23.9V and 23.6V, respectively. 1) (8 points) Find the line and load regulation of this power supply.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 12:10

On a average work day more than work place firs are reorted

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

You know the right answer?

A DC power supply is formed of an ideal transformer feeding an ideal AC/DC full bridge SCR rectifier...

Questions