Engineering, 18.03.2021 02:50 carlinryan
Determine the design stress for bolts in a cylinder cover where the load is fluctuating due to gas pressure. The maximum load on the bolt is 50 kN and the minimum is 30 kN. The load is unpredictable and factor of safety is 3. The surface of the bolt is hot rolled and the surface finish factor is 0.9. During a simple tension test and rotating beam test on ductile materials (40 C 8 steel annealed), the following results were obtained : Diameter of specimen = 12.5 mm; Yield strength = 240 MPa; Ultimate strength = 450 MPa; Endurance limit = 180 MPa
Answers: 3
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Determine the design stress for bolts in a cylinder cover where the load is fluctuating due to gas p...
Biology, 25.02.2021 16:50
Chemistry, 25.02.2021 16:50
Computers and Technology, 25.02.2021 16:50
Mathematics, 25.02.2021 16:50
Geography, 25.02.2021 16:50
Mathematics, 25.02.2021 16:50
History, 25.02.2021 16:50
English, 25.02.2021 16:50
Mathematics, 25.02.2021 16:50
Mathematics, 25.02.2021 16:50
Mathematics, 25.02.2021 16:50
Geography, 25.02.2021 16:50
Mathematics, 25.02.2021 16:50