subject
Engineering, 18.03.2021 03:30 anika420

Choose the type of alternative energy that you will advocate for. You may choose either a wind farm with an attached plant for generating electricity, or a biomass farm with an attached processing plant for generating biofuel. Choose a location where your farm will be built. You must specify a state in the United States and the approximate location within that state. If you wish, you can choose an actual city or town within your location, or you can invent a hypothetical community.
Design a minimum of 10 slides that you will use in your presentation. The slides can be either created on separate pieces of 8.5" x 11" white paper, or they can be designed using computer software such as PowerPoint. The slides should address why the community was targeted, the science behind the technology, and the benefits to the community; they should also address any concerns that you anticipate the community will have. You don’t have to use references outside of this lesson, but you may do so if you wish. Be sure to cite any outside references on your slides.
Give a 15-minute oral presentation using your slides. Imagine that you are addressing the community in a town hall-style meeting and using your slides to illustrate your points. If you can’t give your presentation to your instructor in person, you may film your presentation.

Upload your slides and your 15-minute presentation that reveal your pitch for alternative energy.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
You know the right answer?
Choose the type of alternative energy that you will advocate for. You may choose either a wind farm...
Questions
question
Mathematics, 04.10.2021 14:40
question
Mathematics, 04.10.2021 14:40
question
Mathematics, 04.10.2021 14:40
question
Spanish, 04.10.2021 14:40
question
Chemistry, 04.10.2021 14:50
question
Mathematics, 04.10.2021 14:50
Questions on the website: 13722363