Engineering, 18.03.2021 22:50 harding7807
2. Air expands isentropically through a converging nozzle having a throat area of 500 mm2 under steady state conditions. Air enters the nozzle from a large tank at 1000 kPa and 360 K. For these conditions, determine the mass flow rate of air through the nozzle in kg/s for back pressures of 800 kPa, 528 kPa, and 300 kPa. Be sure to comment on your results.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
You know the right answer?
2. Air expands isentropically through a converging nozzle having a throat area of 500 mm2 under stea...
Questions
Computers and Technology, 27.11.2019 01:31
