subject
Engineering, 19.03.2021 02:10 Flameking1223

Consider water at 27C in parallel flow over an isothermal, 1-m-long flat plate with a velocity of 2 m/s. (a) Plot the variation of the local heat transfer coefficient, hx(x), with distance along the plate for three hL, N/hL,1 LN L/N, hL flow conditions corresponding to transition Reynolds numbers of (i) 5 105 , (ii) 3 105 , and (iii) 0 (the flow is fully turbulent). (b) Plot the variation of the average heat transfer coefficient with distance for the three flow conditions of part (a). (c) What are the average heat transfer coefficients for the entire plate for the three flow conditions of part (a)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 06.07.2019 03:10
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
question
Engineering, 06.07.2019 03:20
An air-conditioning system consists of a heating section and an evaporative cooler. air enters the heating section at 10°c and 70 percent relative humidity at a rate of 30m^3/min, and it leaves the evaporative cooler at 20°c and 60 percent relatively humidity. if the air conditioning system operates at a total pressure of 98 kpa, determine (a) the temperature and relative humidity of the air when it leaves the heating section, (b) the rate of heat transfer in the heating section, and (c) the rate of water added to air in the evaporative cooler
Answers: 2
You know the right answer?
Consider water at 27C in parallel flow over an isothermal, 1-m-long flat plate with a velocity of 2...
Questions
question
Mathematics, 21.08.2019 17:30
question
Mathematics, 21.08.2019 17:30
Questions on the website: 13722361