subject
Engineering, 22.03.2021 20:30 kaleahearly123

UNIT THREE ASSIGNMENT 1. An a. c. bridge is arranged as follows: The arms AB and BC consist of non-inductive
resistance of 100 S2, the arms BE and CD of non-inductive variable resistances, the arm
EC of a capacitor of 1 uF capacitance, the arm DA of an inductive resistance. The a. c.
source is connected to A and C and the telephone receiver to E and D. A balance is
obtained when the resistances of the arms CD and BE are 50 12 and 2500 12 respectively.
Calculate the resistance and the inductance of the arm DA. What would be the effect of
harmonics in the waveform of the alternating current source?​

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
UNIT THREE ASSIGNMENT 1. An a. c. bridge is arranged as follows: The arms AB and BC consist of non-...
Questions
question
Mathematics, 12.10.2020 14:01
question
Mathematics, 12.10.2020 14:01
question
English, 12.10.2020 14:01
question
Mathematics, 12.10.2020 14:01
question
Mathematics, 12.10.2020 14:01
Questions on the website: 13722361