Engineering, 23.03.2021 20:50 hannacarroll3670

PLEASE HEL ASA 1) Explain why the scenario below fails to clearly identify customer needs.

A design company is asked to build a toddler playground for a new school. The team immediately hires a personal trainer, who identifies exercises appropriate for improving toddler balance and strength. Based on the trainer’s recommendations, the team draws up plans for the playground.

2) A beverage company is planning to market a new soft drink. Recommend the most effective way to test the product.

3) Change the following minimally acceptable requirement into one that reflects an ideal value: The Pee Wee helmet needs to safely deflect high-impact pucks.

4) Explain why the scenario below fails to meet the definition of alpha testing.

An electronics company has mass-produced a product that has a major design flaw: a GPS that updates incorrectly when it switches time zones.

5) Explain the type of data the following scenario describes.

A design team conducts a webinar with 25 potential users describing the qualities they find most useful in a new video design program.

6) Explain why the scenario below fails to thoroughly complete the step of researching the problem, the second step in the engineering design phase.

Sam’s design team lists three product goals related to expense, safety, and construction. The team determines that parents of hockey players do not want to spend more than $50 on a helmet for their 10- to 12-year-old children.

PLS HELPP THANK YOU SO MUCH

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.

Answers: 2

Answer

Engineering, 06.07.2019 04:30

What is the principle of operation of a mechanical dynamometer?

Answers: 1

Answer

You know the right answer?

PLEASE HEL ASA 1) Explain why the scenario below fails to clearly identify customer needs.

Questions