subject
Engineering, 25.03.2021 19:50 selena5713

A steam power cycle can be characterized by the pressures between which it operates. The turbineprovides the work out with a high pressure inlet and low pressure outlet. The pump does the opposite, namely increase the pressure from a low value to a high value. For a power plant operating between 7MPa and 15 kPa, determine the ratio of the work delivered by the turbine to the work consumed by thepump. Assume the cycle is completely reversible and that heat losses are negligible.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
question
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
You know the right answer?
A steam power cycle can be characterized by the pressures between which it operates. The turbineprov...
Questions
Questions on the website: 13722363