Series motor takes (80 A) on full-load voltage (400 V) and runs at (1000 r. p.m) the armature resistance is (0.2 Q) and the series winding resistance is (60 m2). 1- Determine the resistance to be connected in series to reduce the speed to (700 r. p.m) with same current. 2- Determine the speed when developing full load torque but with a (0.15 ) diverter in parallel with the field winding.​

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w