Engineering, 30.03.2021 17:40 pukakchiu

Project: Write an Implementation Plan Most schools, towns, and cities have Web sites. Imagine you are asked to implement a plan for a Web site for your school. The designs for the Web site have already been approved. You will describe the steps to develop a project team, budget, and process to build the Web site.

Assignment Directions
The essay should contain at least 500 words. Evaluate at least two different school Web sites. Estimate the number of images you would like to include and how many people will be needed to create the site. Interview one Web site designer to get information. Your implementation plan will have three sections: project team, budget, and process to build the Web site.

Assignment Guidelines
Using information from research, your essay should contain the following:

Review two school Web sites for elements, visuals, and design.
Interview a Web site developer to gain information about cost for a Web site like one of the school examples.
Briefly describe the staff and job tasks of people on your proposed Web site team
Provide information about the site’s functionality and the best ways to use it.
List references for any research.
Write an essay that summarizes your findings about an implementation plan for your school.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

You know the right answer?

Project: Write an Implementation Plan Most schools, towns, and cities have Web sites. Imagine you a...

Questions