Engineering, 02.04.2021 16:20 JonJon05
Presume you went into the lab and completed a GC analysis of distillates obtained from the distillation experiment. You have analyzed three chloroform:toluene mixtures by gas chromatography using a non-polar column. In the distillation lab, a total of 15 ml of the 50:50 starting material was placed in the distillation pot, and four, 3 ml fractions were collected for simple and fractional distillation. The first sample analyzed is approximately 50:50 starting material used in the distillation (undistilled mixture). The second sample analyzed is the second fraction collected during a simple distillation, and the third sample analyzed is the second fraction collected during a fractional distillation. You wish to see how the percentage of each component varies in each sample.
Required:
What should you do?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
Engineering, 04.07.2019 19:20
Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers
Answers: 3
Engineering, 04.07.2019 19:20
Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.
Answers: 1
You know the right answer?
Presume you went into the lab and completed a GC analysis of distillates obtained from the distillat...
Questions
Mathematics, 15.04.2020 15:30
Mathematics, 15.04.2020 15:30
Chemistry, 15.04.2020 15:30
Chemistry, 15.04.2020 15:30
Mathematics, 15.04.2020 15:30
Mathematics, 15.04.2020 15:30
