Engineering, 02.04.2021 18:20 TanelleK9546

A particular unit cell is cubic with ions of type A located at the corners andface centers of the unit cell and ions of type B located at the midpoint ofeach edge of the cube and at the body-centered position. The ions contribute to the unit cell in the usual way (1/8 ion contribution foreach ion at the corners, etc.). (a) How many ions of each type are there per unit cell?
(b) Describe this structure as a lattice and a basis. Check to be sure that the number of ions per unit cell given by your description of the structure as a lattice and a basis is consistent with your answer to part (a).
(c) What is the coordination number of each ion?
(d) What is the name commonly given to this crystal structure?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

You know the right answer?

A particular unit cell is cubic with ions of type A located at the corners andface centers of the un...

Questions