![subject](/tpl/images/cats/User.png)
Engineering, 04.04.2021 19:50 dabboy
determine the forces in all the members and state if these members are in tension or compression, use table to arrange your calculations (show the results on the truss)
![ansver](/tpl/images/cats/User.png)
Answers: 2
Another question on Engineering
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
![question](/tpl/images/cats/User.png)
Engineering, 06.07.2019 03:30
An ammonia compressor has a 5% clearance volume and displacement rate of 80 l/s and pumps against a condensing temperature of 40°c. for two different temperatures of -10°c and 10°c, compute the mass flow rate of refrigerant assuming the clearance volumetric efficiency applies. discharge specific volume corresponding to-10°c and 10°c are 112.5 l/kg and 95 l/kg, respectively.
Answers: 2
![question](/tpl/images/cats/User.png)
Engineering, 06.07.2019 04:10
Steam enters a converging-diverging nozzle at 1.0 mpa and 500°c with a negligible velocity at a mass flow rate of 2.5 kg/s, and it exits at a pressure of 200 kpa. assuming the flow through the nozzle to be isentropic, determine: the exit area and (a) (b) the exit mach number
Answers: 2
You know the right answer?
determine the forces in all the members and state if these members are in tension or compression, us...
Questions
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/istoriya.png)
History, 05.12.2020 05:20
![question](/tpl/images/cats/istoriya.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 05.12.2020 05:20
![question](/tpl/images/cats/mat.png)
Mathematics, 05.12.2020 05:20
![question](/tpl/images/cats/mat.png)
Mathematics, 05.12.2020 05:20
![question](/tpl/images/cats/en.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 05.12.2020 05:20
![question](/tpl/images/cats/istoriya.png)
History, 05.12.2020 05:20
![question](/tpl/images/cats/biologiya.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 05.12.2020 05:20
![question](/tpl/images/cats/himiya.png)
![question](/tpl/images/cats/en.png)
![question](/tpl/images/cats/fizika.png)
Physics, 05.12.2020 05:20
![question](/tpl/images/cats/istoriya.png)
![question](/tpl/images/cats/User.png)
Engineering, 05.12.2020 05:20
![question](/tpl/images/cats/obshestvoznanie.png)
Social Studies, 05.12.2020 05:20