Engineering, 07.04.2021 01:10 liltay12386
You recently connected two Catalyst 2960 access-layer switches, SwitchA and SwitchB, and an external router to your network. Now you need to use the external router for a router-on-a-stick configuration for inter-VLAN routing between VLANs 2 and 4. Both VLANs are already configured on SwitchA and SwitchB and have interfaces assigned to the respective VLANs.
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
You recently connected two Catalyst 2960 access-layer switches, SwitchA and SwitchB, and an external...
Mathematics, 21.03.2020 03:33
Social Studies, 21.03.2020 03:34
English, 21.03.2020 03:34
Mathematics, 21.03.2020 03:34
Social Studies, 21.03.2020 03:34
History, 21.03.2020 03:34
History, 21.03.2020 03:34