Engineering, 08.04.2021 23:50 david7962
Consider a situation where water is used as the coolant in a heat exchanger for a micro-electromechanical device (MEM device). The characteristic velocity is estimated to be 10 microns/s, the length scale of the system is 100 microns, and the characteristic temperature difference of the problem is 10 K. Given what you know about the system, what assumptions can you make about the flow (namely: is it viscous (diffusion)dominated or inertia (convection) dominated, is it conduction dominated or convection dominated, are viscous dissipation effects important, etc.)
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10
An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling
Answers: 2
You know the right answer?
Consider a situation where water is used as the coolant in a heat exchanger for a micro-electromecha...
Questions
History, 14.10.2019 15:00
Geography, 14.10.2019 15:00
English, 14.10.2019 15:00
Health, 14.10.2019 15:00
Social Studies, 14.10.2019 15:00
Mathematics, 14.10.2019 15:00
