Engineering, 12.04.2021 18:20 kcutler8603
The geometrical transformation between a fixed base reference frame and a mobile reference frame in the bidimensional space (2D) is composed of the following operations in this order:
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
The geometrical transformation between a fixed base reference frame and a mobile reference frame
in...
History, 27.11.2019 00:31
English, 27.11.2019 00:31
Computers and Technology, 27.11.2019 00:31
English, 27.11.2019 00:31
Mathematics, 27.11.2019 00:31
Mathematics, 27.11.2019 00:31
Social Studies, 27.11.2019 00:31
Health, 27.11.2019 00:31
Mathematics, 27.11.2019 00:31
Mathematics, 27.11.2019 00:31
Mathematics, 27.11.2019 00:31
Mathematics, 27.11.2019 00:31