Engineering, 12.04.2021 21:00 daionagreene3486
A pipe with insulation: For the same thickness and type of insulation, the thermal resistance of the insulation
1. Decreases with decreasing radius of the pipe
2. Increases with decreasing radius of the pipe
3. Does not change with decreasing radius of the pipe
4. Could either increase or decrease with decreasing radius of the pipe
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 19:20
Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.
Answers: 2
Engineering, 04.07.2019 19:20
To design a steam turbine to produce 12,000 hp power. a engineer comsiders using a steady state stean low st 1160fr and engineer considers using a steady state steam flow at 1160°r and 450 psia to drive this steam turbine. the exhaust of the steam is cooled by the lake (vacuum). heat losing to the surroundings is measured at a rate of 555.55 btu/s. (a) sketch the system with the given conditions. (b) neglecting kinetic and potential energy changes from inlet to exit, determine the volumetric flow rate of the steam at the inlet, (ft'/hr). must clearly show unit conversions at crtical terms.
Answers: 1
A pipe with insulation: For the same thickness and type of insulation, the thermal resistance of the...
Mathematics, 08.01.2021 17:20
Social Studies, 08.01.2021 17:20
Mathematics, 08.01.2021 17:20
Mathematics, 08.01.2021 17:20
History, 08.01.2021 17:20
English, 08.01.2021 17:20
Biology, 08.01.2021 17:20
History, 08.01.2021 17:20
Mathematics, 08.01.2021 17:20
Mathematics, 08.01.2021 17:20
History, 08.01.2021 17:20