Engineering, 12.04.2021 21:40 rileyeddins1010
applied stress of 240 kPa on the ground surface. Between the depths of 21 and 27 m there is a layer of soft clay. The rest of the subsoil is dense sand. Compute the applied vertical pressure due to the weight of the building, at the following points located in a horizontal plane at mid-height of the compressible layer: directly below centerline of building; and 6, 12 and 18 m from the centerline.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
applied stress of 240 kPa on the ground surface. Between the depths of 21 and 27 m there is a layer...
Questions
History, 11.06.2020 03:57
Mathematics, 11.06.2020 03:57
Mathematics, 11.06.2020 03:57
Mathematics, 11.06.2020 03:57
History, 11.06.2020 03:57
Mathematics, 11.06.2020 03:57
Chemistry, 11.06.2020 03:57
Mathematics, 11.06.2020 03:57
English, 11.06.2020 03:57
Mathematics, 11.06.2020 03:57
