Engineering, 15.04.2021 20:10 jagger68
Write a set of non-functional requirements for the drone system, setting out its expected safety and response time?
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Write a set of non-functional requirements for the drone system, setting out its expected safety and...
English, 06.05.2020 08:38
Mathematics, 06.05.2020 08:38
English, 06.05.2020 08:38
Engineering, 06.05.2020 08:38
English, 06.05.2020 08:38
Physics, 06.05.2020 08:38
Mathematics, 06.05.2020 08:38
English, 06.05.2020 08:38