Engineering, 18.04.2021 06:00 robert7248

Choose a jet aircraft to use as your example for this activity. It should not be an exotic jet aircraft, as you will need to find data online for the aircraft. If you choose a military aircraft, make sure you are not using classified data to support your work. Only use data that is available to all on the internet. You will then use the data you gathered for this particular aircraft to show examples of your performance problems and how you derived them. To provide an outlook to some of the aspects of next module's unaccelerated performance, select a jet aircraft of your choice, choose three (3) of the following items of performance, and prepare an instructional presentation (utilizing a presentation tool of your choice - see resources in the Online Tools section) that explains in-depth how to find these different items of performance for a jet aircraft. This will be a standalone presentation and will not be attached to your comprehensive presentation project. Available choices:

maximum forward speed in level flight
absolute ceiling
best angle of climb airspeed
angle of climb
best rate of climb airspeed
rate of climb
maximum endurance airspeed
maximum range airspeed
influence of weight on performance
influence of altitude on performance
influence of configuration on performance

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

You know the right answer?

Choose a jet aircraft to use as your example for this activity. It should not be an exotic jet aircr...

Questions