subject
Engineering, 19.04.2021 01:10 joshuaburton773

21. Explique claramente como el fenotipo es el que favorece o desfavorece los resultados productivos obtenidos tanto en las explotaciones agrícolas como en las explotaciones pecuarias.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
question
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
question
Engineering, 06.07.2019 04:30
Calculate the resolved shear stress on the (111)[011] slip system of a unit cell in an fcc nickel single crystal if a stress of 13.7 mpa is applied in the [001] direction of a unit cell.
Answers: 1
question
Engineering, 06.07.2019 05:10
Draw each component in sequence for a steam (rankine cycle) power plant. draw the system boundary needed to analyze this cycle as a closed system. note: this should just be one figure below! else
Answers: 2
You know the right answer?
21. Explique claramente como el fenotipo es el que favorece o desfavorece los resultados productivos...
Questions
question
Spanish, 15.10.2019 13:00
question
Mathematics, 15.10.2019 13:00
Questions on the website: 13722359