subject
Engineering, 20.04.2021 14:00 peno211

Assignment # 2 Case Study
Sameer has recently joined a baking factory as a production manager. He observed that the output of staff involved in production is very low as compared to the performance required by them. On analyzing the reasons, he found out that a lot of time of the workers is wasted in getting the required materials issued from the store. Sameer enquired the store keeper reason as to why the material is not issued in time. The store keeper interestingly replied that he receives the demand of certain items which are not available in store. Every day the workers approach him at the last minute to provide different items. If these are not available in the store then he has to place an order with the purchase officer. As a result, a lot of time of the workers is wasted. Sameer felt that there is no harmony in the working of the production department as a whole. So in order to integrate the various production activities, like finance, inventory and purchase, Sameer ensured, that the store keeper is informed three days in advance about the required material, enough finance is available for purchase and consequently, the store keeper is able to keep the materials ready for the workers every morning in accordance with their requirements. Sameer also realized that the workers were not concerned with the achievement of set production targets. Their salary was same for all ranks without considering their skills and experience.

In context of the above case:

1. What was lacking in different production activities
2. Identify and explain the managerial skill used by Sameer to streamline the working of the production department
3. What corrective measure should be taken by Sameer to control the output of the workers

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
Assignment # 2 Case Study
Sameer has recently joined a baking factory as a production manage...
Questions
question
Mathematics, 13.04.2021 07:00
question
Mathematics, 13.04.2021 07:00
question
Mathematics, 13.04.2021 07:00
question
Mathematics, 13.04.2021 07:00
question
Chemistry, 13.04.2021 07:00
question
Mathematics, 13.04.2021 07:00
question
Mathematics, 13.04.2021 07:00
Questions on the website: 13722367