- ¿En un cable UTP Cat. 5e, será necesario que los 8 hilos estén correctamente conectados? - ¿Qué hilos forman parte de la transferencia de datos? - ¿Para qué se pensó usar los otros hilos, de qué manera tú lo usarías?

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.